Elinchrom BRX Kits and Flash Heads

BXRi has now become BRX
The new BRX compact flash units are a further evolution of the features and quality that are Elinchrom. 

The concept is simple. Control, Power, Speed and Versatility. With many programmable features and the EL-Skyport remote system, the BRX enables photographers the greatest freedom to express their individuality.

The BRX series deliver the quality of performance needed for a modern workflow. Available in either 250 Ws or 500 Ws, they are perfect for portraiture, landscape, product and architectural photography. 

They are the successors of the EL-500’s in this digital era.

What's new?
Take full control of your units settings with the EL-Skyport App for iPhone™, iPad and iPod Touch™ via the optional WiFi module. Additional features can be found when used with the EL-Skyport Software* such as flash delay for strobing effects. There is also improved electronics for better performance and a firmware update option.

*The optional USB Transceiver RX and Skyport Software 3.0 are required.

BRX Facts
•    Built-in EL-Skyport receiver for triggering.
•    EL-Skyport with 8 Frequency Channels with 4 Groups.
•    EL-Skyport Speed Sync mode for synchronization up to a 1/320 s on enabled SLR cameras.
•    Pre-flash detector system to enable the use of BRX with speedlights.
•    Visual Flash Confirmation option. The modelling lamp comes on to confirm the flash has been triggered.
•    Proportional, maximum, minimum and independent adjustment of the modelling lamp.
•    Variable f-stop steps: 1/1, 5/10, 4/10, 3/10, 2/10 or 1/10 steps are available.
•    Programmable ready beep function.
•    Power Auto-dump.
•    Automatic temperature controlled ventilation.
•    Action flashtube for sharper images.
•    Multi-voltage auto-detection: 90-270 V (excluding modelling lamp).
•    5V sync socket for maximum protection of digital cameras.
•    High impact resistant body shell.
•    Accessory bayonet allowing the complete range of light modifiers.
•    Rubberised handgrip with built-in fuse storage.

NOTE: Each unit comes supplied with a UK mains cable, modelling lamp, flash head cover and sync cable. The 16mm 90º Umbrella Reflector shown in the photographs is not included with the flash head. They are available to purchase separately on our Elinchrom Reflectors page.

There are three BRX "To-Go" kits available, they include:

	click image to enlarge

Your choice of EITHER:
• 2x BRX 250 heads,
• 2x BRX 500 heads or
• 1x BRX 250 with 1x BRX 500 head.
(heads include modelling lamps)

PLUS:
2x Sync leads
2x Mains cables
2x ClipLock Lighting Stands 88-235cm with carrying bag
2x Portalite 66x66cm Softbox
1x EL-Skyport Transmitter SPEED
2x Protective hoods
1x Tube bag - for carrying your kit.

Wanting to purchase a high value items but don't have the necessary funds?

Click here for further information about how to make this possible.